Measurement technology hardware

The UMD 96 is a powerful front panel meter* and replaces all analogue meters. It measures 3-phase current and voltage in 4-quadrant operation in class …

The UMD 97 is a powerful front panel meter* and replaces all analogue meters. It measures 3-phase current and voltage in 4-quadrant operation in class …

The UMD 98 is a high-performance front panel meter* and replaces all analogue measuring devices. It measures 3/4-phase current and voltage in 4-quadrant operation in …

The numerous advantages of the UMD 98 now make the CAT IV version even more interesting. The devices thus fulfill the requirements of IEC 61010-1 and are therefore ideally suited for use in CAT IV areas.

This is a high-precision front panel meter with dimensions of 144 x 144 mm, a sampling rate of 57.6 kHz and the detection of harmonics up to 9 kHz. With up to four communication interfaces, it can be connected to almost all higher-level systems and our compact measuring modules can be connected at the same time.

The UMD 913 is a powerful, multifunctional, high-precision measuring instrument for panel mounting. It measures 4-phase current and voltage in 4-quadrant operation, in class 0.05 …

The MMB 700 is a compact high-end power quality meter for DIN rail mounting. It measures up to 15 currents and 3 voltages in 4-quadrant …

The voltage module MMU 3 serves as an alternative basis of a modular measuring system if no master with local bus connection (e.g. MMB 700) …

The MMI 12 module is a current module for connection to an MMU 3 or an MMB 700. Up to 12 current channels can be …

The MMI 12Flex module is a current module for connection to an MMU 3 or any other master device with a local bus connection. Up …

The MMI 12RCM module is a current module for connection to an MMU 3 or any other master device with a local bus connection. Up …

The MMI 12DC module is a current module for connection to an MMU 3 or any other master device with a local bus connection. Up …

The UMD 703S is a cost-effective yet powerful energy measuring device that can also record important aspects of voltage quality such as harmonics. The device is equipped with a real-time clock and a serial RS485 interface and can therefore communicate with common Modbus systems. The current measurement is carried out 3-phase via small signal converters (333 mV secondary signal), which enables the compact dimensions with a width of only 3HP to be achieved.

The UMD 705 is a compact power quality meter with data logger for DIN rail mounting. It measures 3-phase current and voltage with up to …

The UMD 707RCM is a compact high-end residual current meter for DIN rail mounting. It measures 5-channel residual currents (type A) and the voltage quality …

The UMD 707DC is a compact high-end DC meter for DIN rail mounting. It measures 5-channel direct or alternating currents, as well as direct and …

The UMD 710A is a compact high-end power quality meter for DIN rail mounting. It measures 4-phase current and voltage with up to 3 tariffs …

The UMD 710EVU is a compact high-end power quality meter for CAT IV environments for DIN rail mounting. It measures 3-phase current and voltage with …

The UMD 710MVU is a compact high-end power quality measuring device for CAT IV environments for DIN rail mounting. The UMD 710MVU is equipped with …

With the IO-M 500 modules, the UMD measuring devices can be expanded to include digital inputs, relay inputs or temperature inputs. In this way, further …

The mobile measuring case MMD 98RCM records all voltage quality parameters and logs these data as single-, three- or four-phase measurement in the low-voltage network …

With our MMD 913, we now also offer a mobile solution for class A power quality measurement in accordance with IEC 61000-4-30. With our tried and tested UMD 913, you get a power quality analyzer that has been tried and tested over many years and is highly precise. This allows you to record and evaluate harmonics up to 9 kHz and residual currents on the move.

The CMD 68-MID is a modern energy meter for DIN rail mounting and determines active and reactive energy as well as other electrical measured values …

The CMD 68 45xMID is a modern AC energy meter for DIN rail mounting. It determines active and reactive energy in class B, as well …

Ethernet interface Modbus TCP measures 3-phase current and voltage in 4-quadrant operation Available as direct measurement (75 A) or transformer measurement (1 / 5 A) MID approval Illuminated, large and …

The CMD 68-MID is a modern energy meter for the DIN top-hat rail and determines active and reactive energy as well as other electrical measured …

PTB-A 20.1 and PTB-A 50.7 approval MID B+D approval 15-minute load curve memory with memory depth of over 3 years TCP/IP interface with integrated web server, NTP, Modbus …

The automated meter reading guarantees error-free and continuous data acquisition for later analysis and billing according to ISO 50001. All energy meters (e.g. electric, water, …